Monday, May 17, 2010

Netgear XAV101 Powerline Networking - Syncing or adding a device

I just wrestled with adding a 3rd Netgear XAV101 powerline networking device to my network. The main problem is that the documenation is blatantly wrong. To press the security or factory reset buttons, you do NOT hold them down. You just click them once. I kept getting stuck in the stage with two green lights on (first and third) implying the device was not paired correctly.
The steps I followed to get everything working with a custom private key:
  1. Go to each unit in your network and click the "factory reset" button once.
  2. Once everything is reset go to device #1 and press the "security" button once, then go to device #2 and press the security button once.
  3. Wait two minutes. (I think you have to pair 2 devices before you can add a third)
  4. To add the 3rd (or 4th or 5th) device. Click the "factory reset" button (why not?) and wait a few seconds.
  5. Press the security button on device #3, then press the security button on device #2. That should pair #3 to the first two.
The Netgear documentation says you need to hold these buttons down for two or 10 seconds. When we did that, it seemed to make sure that nothing happened whatsoever!

3 comments:

Anonymous said...

Great Job! Keep it up Sir!

David Tam said...

Thank you so much for this info... I love powerline products vs wireless products. I didnt know if 2 pair of netgear xav101's could coexist.

Anonymous said...

God I love you , been trying for days and bloody days to fix this problem . Been on every site you can think of and still no fix , then I just stumbled across your blog and two clicks later THREE green lights across the board . Many thanks for you help . Happy new year to you and your family